Magneto wallpaint

Magneto wallpaint

Make magnetic surface your children’s room’s wall for their magnetic toys. Paint the wall with Alpina Magneto Paint, which include metal powder, then paint it with any color or piant a beautiful landscape or colorful illustration.

Interior wall surfaces suitable for magnetic toys can be created using Alpina paint.

-Packaging: 1 liter base paint
- 1 liter Ink cover
- Color: silver-grey
- Brightness: dull
- Binder: Polyacrylamide resin

Caparol Alpina Magneto magnetic paint – Base paint

Coverage:
Approximately 500 ml/m² per coat on a smooth surface. More on a rough surface. The exact amount should be determined by test painting.

Qualities:

Magneto wallpaint

  • Wetbase, slight smelling and environmentally sound
  • Diffusible, durable and strong
  • Easy to fix
  • It doesn’t become yellow
  • Scratch-resistant

Drying time:
A new coat can be applied after 24 hours at a temperature of +20°C and 65% relative humidity. Drying time is longer where the temperature is lower and humidity higher.

Surface preparation:
Plaster and rendered mortar plaster, gypsum and ready-made plaster, plasterboard, unpainted wallpaper, load-bearing coating or synthetic resin coating, concrete, limestone and untreated brick surface, adhesive paint coating. Prime the surface with Alpina Primer Paint.

Application:
Pour into a suitable container and stir thoroughly. Do not use thinners and never mix with other paints. Apply generous coats with a flat brush or short-hair roller. To get the best result, apply 3 coats. Leave for about 6 hours between coats. Use plastic foil to prevent the paint and brush from drying out.

Caparol Alpina Magneto magnetic paint – Ink cover

Qualities:

  • Wetbase, slight smelling and environmentally sound
  • Diffusible, durable and strong
  • Easy to fix
  • It doesn’t become yellow
  • Scratch-resistant

Magneto wallpaintCoverage:
Approximately 140 ml/m² per coat on a smooth surface. More on a rough surface.

Application:
After complete drying of MagnetoGrundfarbe (approx. 24 hours), 2 coats of white or colour Magneto paint must be applied with a brush or roller. Leave about 6 hours between coats, during which time it is important to protect the brush or roller from drying out.

Color: White
Colored: for example AlpinaColor
Apply generous: coats with a flat brush, temperature of more than +20°C.
Drying time: Paint is touch dry within 4-6 hours, and can have a new coat applied in 12 hours, at a temperature of +20°C and 65% relative humidity. Can be used after approx. 3 days.

Downloads Alpina Magneto Piant and Inc cover documnents (only in Germany):

Alpina Magneto safety data sheet » 
Alpina Magneto technical information »

Magneto wallpaint

Magneto wallpaint There are no products in this category.